Preparing for the big one - Ebro in SHQ

After the try out earlier in October of a small part of the Ebro battle, I've started to crank up the prep for the big one. I knew I had to address the issue of how to do hills and I dealt with that in my post about gluing mdf hexes to polystyrene. With these all done, I could start to work on what else I needed.


This is my initial go at a layout. I've got enough hex hills, which is a relief, and with one building per built up area I'm good on those too. I've switched from my hardboard/plywood roads and gone to the felt strips I used for my WW1game. On reflection these are great, but are probably too wide. I had to borrow Mrs T's dress making scissors and set to them. This also doubled the number of roads I've got! The town labels needed redoing too.

The eagle eyed amongst you may have spotted that the hex area is bigger than usual. That's because I've taped both my cloths together to make a 8' x 5' playing area.

The shape of the river wasn't right as my sections are intended for an open area with no hexes table or for squares. I'll needed to get the (new) jigsaw out and cut some with the correct angles for hexes.

I've sorted the orbat, mostly, relying heavily on the board game I mentioned before. In truth the Osprey is very poor for this. It has a Republican and Nationalist orbat, but for different stages of the battle (3 months apart!). The 3D maps across two page spreads are honestly nice eye candy but in fact are a waste of space, as are the pages devoted to the various weapons used.


Having got that done I just needed to transfer it to sheets of A4 sticky labels and then spend a couple of afternoons applying these to the figures to be used, so everyone knows what unit is in what division.  These sheets are for the Nationalists. The Republicans are done, and took pretty much every SCW Republican figure I've got, bar the Basques. I've dragged every truck from every box out, and even based up my rubber promo trucks I got from Tim Price* many years ago (there's one near the place mat, with a Red Cross on the roof). I also commandeered all my horse drawn wagon that look suitable.


Here's a Republican Division of three mixed brigades. I forgot to do Recce unit labels, so I've improvised one rather than use a whole sheet of labels.


The normal wine glass approach to aircraft has had to go, as I need more attack groups than I have glasses. A bit of foam board seems to work out okay.  I'm not happy with the ersatz pontoon bridge, so that has been replaced by a whole load of new constructions I did yesterday. For this game each Republican division has an engineering/bridging unit, and between them the two corps involved in the attack have 16 bridges of various types to deploy. I think Chris K will need to be a Republican for this game. He'll be in engineering heaven.


This is a corps worth of bridges. The grey one is the "iron bridge", then there's one wooden "heavyweight bridge", two "lightweight bridges" and four infantry pontoon bridges. They're made from lolly sticks and tongue depressor modelling sticks, together with some foam board.


Here's a tank using an iron bridge. The modelling is a bit scrappy, but it has to be robust and fit within the hex.


I've got the urban area labels done as well, and put out some trees.


I found some rail track too, as you can see in the corner.


I've also bought some blue ribbon to use as streams.

I think that's mostly done from the scenery point of view. Now I need to work out the reinforcement schedule.

*IYKYK

 

Comments

  1. This looks like it's going to be an epic game. I'm (very slowly) working my way through the Giles Tremlett book on the International Brigades. I have to have rests from it because it's so heavy going (emotionally).

    ReplyDelete
    Replies
    1. So much written on the SCW is both epic and harrowing. I've not read Tremlett's book. Paul Preston's "Spanish Holocaust" is a gruelling read. I wrote about my views on it in 2014: https://wargaming4grownups.blogspot.com/2014/06/holiday-reading.html A lot of other the books I have read on the subject are tough going too. It is also an endlessly fascinating subject.

      Delete
  2. Looking great Graham. I'm looking forward to this. I didnt think the maps in the Osprey were terrible, but not sufficient on their own.

    ReplyDelete
    Replies
    1. The Osprey maps are okay. I just don't think the 3D layouts are worth the pages used. My main criticism is about the orbats.

      Delete

Post a Comment